设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

GB/T 5009.43-2003 味精卫生标准的分析方法

上一篇: GB/T 5009.34-2003 食品中亚硫酸盐的测定
下一篇: GB/T 5009.35-2003 食品中合成着色剂的测定

Product Code:SAE J1366
Title:Rating Lift Cranes Operating on Platforms in the Ocean Environment
Issuing Committee:Cranes And Lifting Devices Committee
Scope:The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15.Product Code:SAE J1301
Title:Truck Deformation Classification
Issuing Committee:Accident Investigation And Reconstruction Practices Cmte
Scope: The scope and purpose of this SAE Recommended Practice is to provide a classification system for deformation sustained by trucks involved in collisions on the highway. Application of the document is limited to medium trucks, heavy trucks, and articulated combinations. The TDC classifies collision contact deformation, as opposed to induced deformation, so that the deformation is segregated into rather narrow limits or categories. Studies of collision deformation can then be performed on one or many data banks with assurance that data under study are of essentially the same type. Many of the features of the SAE J224 MAR80 have been retained in this document, although the characters within specific columns vary. Each document must therefore be applied to the appropriate vehicle type. It is also important to note that the Truck Deformation Classification (TDC) does not identify specific vehicle configurations and body types. The TDC is an expression, useful to persons engaged in vehicle safety, to appropriately describe a collision-damaged truck with conciseness in oral and written communications. The TDC is also a research tool; however, it has not been designed for use in impact energy computation. The research community is cautioned not to attempt direct conversion calculations from the TDC to energy equivalents required to duplicate the damage. The system consists of seven alphanumeric characters arranged in a specific order to form a descriptive composite of the vehicle damage (see Figure 1). The characters describe the principal force direction, location, specific area, type, and extent of damage. The individual character positions are referenced by column number for identification. The definition of each classification is provided in subsequent sections.

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1